GATOR Pumps are steel fabricated and offered in several different configurations, including trailer pumps, vertical pumps, floating pumps, and hydraulic pumps. The submerged operations of the case and impeller eliminates priming and suction hose and also enhances the moving of heavy solids when needed.
Standard pump sizes range from 4″ discharge to 24″ discharge, with flows from 1500 gallons per minute to 18,000 gallons per minute discharge. They are powered either by the P.T.O. of tractors, diesel engines, electric motors, or hydraulically. We also offer custom fabrication for specific requirements. All GATOR Pumps come with a full-year warranty.
The casing and impeller design for all GATOR Pumps is a single stage, radial flow centrifugal pump. Suction is either single or double depending on the pump size with either a closed or open impeller. A ninety degree elbow and steel pipe convey liquid being pumped to the front of the trailer and also forms part of the trailer’s structure. The pump shafting is turned, ground, and polished 1045 carbon steel. Water lubricated marine bearings press-fit into steel housings and support the shafting on both sides of the casing. Sealed ball bearings support the shafting to the front of the pump. The pump is prepared for painting by sandblasting, then an epoxy undercoat and finished with an acrylic enamel.
We think you’ll find that GATOR Pump’s products are the highest quality, most efficient and easy-to-use pumps on the market. Contact us today so that we can meet all your pumping needs!