Gator Pump Specs

All GATOR Pumps can be powered by tractor p.t.o. or frame mounted engines or by electric motors and are available in 2 inch to 24 inch discharge sizes, with flows up to 18,000 gallons per minute.   Stainless steel fabrication is available for abrasive and corrosive environments.

DimensionsW80” x H56” x L24’. Custom lengths available up to 40’.
Average weight (PTO driven models)2400 lbs.
CasingA36 mild steel is standard
FrameA36 steel construction with a 3,500-pound road-worthy axle and 15” 4 ply tires.
Discharge2”, 4”, 6”, 8”, 10”, 12”, 16”, and 24” models available.
ImpellerEnclosed type centrifugal radial flow A36, AR or stainless-steel fabrication.
SpeedAll PTO models available in 540 rpm or 1000 rpm. RPM adjustment options for specific flow requirements.
Flow rateFlows vary by pump size and speed. Consult individual pump performance curves and tables.
Impeller ShaftASTM carbon 1045 PSQ. Stainless steel for salt water applications
Impeller Bearing PedestalBrass and rubber marine bearings “water lubricated” (Cutlass)
Solids HandlingHandles 2” diameter spherical solids. Open impeller available to handle larger solids.
Drive ShaftASTM carbon 1045 PSQ. Stainless steel for salt water applications.
Drive Shaft support bearingsTriple lip sealed bearing with lubrication lines run to the front of the trailer from each bearing.
Bearing LubricationLithium EP2 Grease.
Standard EquipmentPower Take-Off (PTO) shaft connector. Discharge line air relief vacuum breaker.
Optional EquipmentDischarge tubing, hose couplers, hose clamps, standard parts kits.