Gator Pump Specs
All GATOR Pumps can be powered by tractor p.t.o. or frame mounted engines or by electric motors and are available in 2 inch to 24 inch discharge sizes, with flows up to 18,000 gallons per minute. Stainless steel fabrication is available for abrasive and corrosive environments.
| Dimensions | W80” x H56” x L24’. Custom lengths available up to 40’. |
| Average weight (PTO driven models) | 2400 lbs. |
| Casing | A36 mild steel is standard |
| Frame | A36 steel construction with a 3,500-pound road-worthy axle and 15” 4 ply tires. |
| Discharge | 2”, 4”, 6”, 8”, 10”, 12”, 16”, and 24” models available. |
| Impeller | Enclosed type centrifugal radial flow A36, AR or stainless-steel fabrication. |
| Speed | All PTO models available in 540 rpm or 1000 rpm. RPM adjustment options for specific flow requirements. |
| Flow rate | Flows vary by pump size and speed. Consult individual pump performance curves and tables. |
| Impeller Shaft | ASTM carbon 1045 PSQ. Stainless steel for salt water applications |
| Impeller Bearing Pedestal | Brass and rubber marine bearings “water lubricated” (Cutlass) |
| Solids Handling | Handles 2” diameter spherical solids. Open impeller available to handle larger solids. |
| Drive Shaft | ASTM carbon 1045 PSQ. Stainless steel for salt water applications. |
| Drive Shaft support bearings | Triple lip sealed bearing with lubrication lines run to the front of the trailer from each bearing. |
| Bearing Lubrication | Lithium EP2 Grease. |
| Standard Equipment | Power Take-Off (PTO) shaft connector. Discharge line air relief vacuum breaker. |
| Optional Equipment | Discharge tubing, hose couplers, hose clamps, standard parts kits. |